TIMBERLINE - Decorative and Specialist Hardwoods
Woodfinishing: | Shellac Polishes | Sanding Sealer | Friction Polish |
| Lacquers and Varnishes | Oil Finishes | Wax Finishes |
| Woodstains | Solvents and Sundries |
| Lacquers and Varnishes | Oil Finishes | Wax Finishes |
| Woodstains | Solvents and Sundries |
Sanding Sealer
Designed to be an easily applied basecoat on which other finishes can be applied. Additives are included which make it easy to sand back without clogging the abrasive paper. All types are normally applied with a brush and will dry well enough to be sanded back in just a few minutes.
| volume unless stated: | 500ml | 1 litre |
| Myland pale lacacote sanding sealer | £7.90 | £13.10 |
| Chestnut shellac sanding sealer | £7.00 | £11.85 |
| Chestnut acrylic sanding sealer | £8.05 | £13.60 |
| Chestnut cellulose sanding sealer | £7.45 | £13.15 |
| Chestnut cellulose sanding sealer aerosol - 400ml | £6.20 |
Tips
- Can be used to mask off and preserve the original colour of specific areas when wood staining.
- Can be used on marquetry or inlaid areas where many different coloured woods are present to prevent the dust of a strongly coloured wood contaminating the pores of a paler coloured wood.
- Use for the sanding sealer and wax finish, one of the fastest professional looking finishes there is.
Procedure - brush one coat shellac sanding sealer – after a couple of minutes lightly rub down (de-nib) with 320grit lubrasil or garnet paper - burnish with 0000 wire wool to remove any scratch marks – apply one coat wax polish in the normal way.
Woodfinishes in stock
